Google
Reviews

C190H Air Permeability Tester

C190H Air Permeability Tester applies volume method, and is professionally applicable to the gas permeability test of battery diaphragm, breathable membrane and related polymer materials, as well as the gas permeability test of cigarette paper and various papers.

Product FeaturesNote 1

Volume Method, Fully-automatic & Highly Precise

  • Gas volume passing through the specimen is fully-automatically determined, replacing the traditional manual sliding cylinder gas volume measurement method.
  • Fully-automatic high-precision pressure control technology; the pressure accuracy is better than 0.01kPa.
  • Test pressure can be set freely by software.

Three-cell Design, Flexible & Efficient

  • Three-independent-testing-cell design can accomplish tests for threes specimens in a single test.
  • Three-cell independent test and three-cell joint test can be selected freely.
  • Fast test mode is provided, and the total test time of three cells is reduced to 1 minute.

Automatic Specimen Clamping, Safe & Labor-saving

  • Pneumatic specimen clamping saves time and labor, with consistent clamping force and better sealing.
  • Anti-pinch design and safer operation.

Intelligent Control, Convenient & Reliable

  • 12 inch tablet of Windows system is installed for more convenient control.
  • Embedded unique high-end Labthink industrial computer eliminates system failures caused by computer viruses and ensures operation reliability and data storage security.
  • Core sensor and pneumatic control system are from world-renowned manufacturers, with low failure rate and long service life.
  • Automatic detection of temperature and humidity of test environment; automatic record of the test conditions.
  • The instrument supports multi unit display, such as s/100 mL and um/(Pa·s), which is applicable to the detection requirements of different standards.
  • Software has functions such as multi-level authority management and audit tracking (Optional).

Test Principle

In the test temperature, humidity and atmospheric pressure, the instrument tests the time required for 100mL air passing through the diaphragm with an area of 6.45cm2 under the pressure of 1.21kPa.

Reference StandardsNote 1

ISO 5636, TAPPI T460, GB/T 36363-2018, GB/T 458-2008, GB/T 23227, GB/T 12655

ApplicationsNote 1

Basic Applications
  • It is suitable for testing the gas permeability of various materials such as battery diaphragms, breathable membranes and related polymer products
  • Extended Applications
  • It is suitable for testing the gas permeability of cigarette paper and other paper (customized)
  • Technical Specifications

    Table 1: Test Parameters Note1

    Parameters\Model C190H
    Test Scope s/100 mL 30~1500
    um/(Pa ? s) 0.1~4
    Volume Resolution mL 0.001
    Volume Accuracy mL 1%
    Pressure Range kPa 0~2
    Pressure Accuracy kPa 0.01
    Extended Functions DataShieldTM Note2 Optional
    GMP Computer System Requirements Optional
    CFR21 Part11 Optional

    Table 2: Technical Specifications

    No. of Test Cells 3 sets
    Specimen Size ≥2” x 2” (6cm×6cm)
    Specimen Thickness ≤120 Mil (3mm)
    Test Area 1” (6.4cm2)
    Gas Specifications Dry air (air source is provided by the user)
    Interface Size Φ6mm Polyurethane Pipe
    Dimensions 23.6” H x 19.6” W x 27.5” D (25cm× 44cm× 35cm)
    Power 120VAC±10% 60Hz / 220VAC±10% 50Hz (either-or)
    Net Weight 40Lbs(18kg)

    Configurations

    Standard Configurations
    Instrument mainframe, tablet, professional software, and Φ6 mm polyurethane pipe
    Optional Parts
    Air compressor, CFR21Part11, GMP Computer System Requirements, DataShieldTM Data ShieldNote 3
    Note
    Compressed air inlet of the instrument is Φ6 mm polyurethane pipe (with pressure of 87PSI/600 kPa); air source is provided by the user.Compressed air inlet of the instrument is Φ6 mm polyurethane pipe (with pressure of 87PSI/600 kPa); air source is provided by the user.

    Note 1: the Reference Standards, Applications and Product Features are subject to the specific information in the "Technical Parameters". "Reference Standards" means that the test method is basically consistent with the method(s) described in the standards.
    Note 2: the parameters in the table are measured by professional operators in Labthink laboratory according to the requirements and conditions of relevant laboratory environmental standards.
    Note 3: DataShieldTM Data Shield system provides safe and reliable data application support. The system can be shared by multiple Labthink products. Please purchase it separately according to the use situation.

    Related Products